FAQ
domicile /FAQ /

What is the difference between phase-angle control and zero-cross (burst) firing?

What is the difference between phase-angle control and zero-cross (burst) firing? Jul 24

 

  • Phase-angle control: The SCR is turned on at a variable delay after each zero-crossing of the AC sine wave. It provides very fine, continuous voltage regulation. It is mandatory for inductive loads (transformer-coupled loads) and useful for loads whose resistance changes with temperature (e.g., silicon carbide, tungsten).
  • Zero-cross (burst) firing: The SCRs are only switched on and off at the zero-voltage crossing of the mains. The controller varies the number of full AC cycles applied to the load. This method generates the lowest harmonic distortion and is the preferred choice for conventional resistive heating elements (nickel-chromium, constant-resistance loads).

maxwell est votre meilleure solution pour les processus thermiques et les applications d'automatisation industrielle
Hotline SAV 24h/24 : +86-592-6382791
contact social

numériser via wechat

Scan to Whatsapp

© 2026 Xiamen Maxwell Automation Limited tous les droits sont réservés | plan du site | Xml | politique de confidentialité |
IPv6 réseau pris en charge

laisser un message

laisser un message
si vous êtes intéressé par nos produits et souhaitez en savoir plus,veuillez laisser un message ici,nous vous répondrons dès que possible.

domicile

des produits

Contactez

whatsapp